| |
Rabbit Minicores™
For industrial and commercial control applications |
| |
MiniCore family of microcontroller modules
- Rabbit's smallest and lowest cost embedded solution
- Easy path to adding reliable control and network connectivity to any system
- Standard 52-pin mini PCI Express socket
- Esy start with with Rabbit's Dynamic C® IDE
- C-language based IDE available as a free download and includes an editor, linker, loader and compiler;
- Extensive library of drivers and sample programs
- Royalty-free TCP/IP stack with source
|
|
|
| |
|
MiniCore™ RCM5600W |
MiniCore™ RCM5700 |
Features and Benefits
● Rabbit® 5000 running at 74 MHz
● On-board single-chip 802.11b/g transceiver
● Up to 35 GP I/O lines and six serial ports
● 1 MB SRAM and 1 MB serial flash memory
● Built-in web server
● Certified to meet FCC and other international regulatory requirements
● Easy-to-use integrated design environment
Applications
Data archiving
Tank monitoring
Automatic meter reading
Remote energy management
Security and surveillance |
|
|
Key Features
● Small, low-profile board (1.20" x 2.00" x 0.12")
● Low cost
Rabbit 5000 microprocessor
● 10/100Base-T Ethernet
● Mini PCI Express form factor
● Small, low-profile form factor
● Very low cost for high volume applications
● Known good hardware reduces design risk
● Easy-to-use integrated design environment
Applications
Data archiving and upload
Tank monitoring
Automatic meter reading
Remote energy management
Security and surveillance |
|
|
|
| |
|
Specifications |
Specifications
|
| |
|
| Features |
RCM5600W |
| Microprocessor |
Rabbit® 5000 at 74 MHz |
| EMI Reduction |
Spectrum spreader for reduced EMI (radiated emissions) |
| Serial Flash memory |
1 MB |
| SRAM |
1 MB |
| Backup battery |
Connection for user-supplied backup battery (to support RTC) |
| General-purpoce I/O |
Up to 35 parallel digital I/0 lines configurable with four layers of alternate functions |
| Additional inputs |
Reset in |
| Additional outputs |
Status, reset out |
| External I/O bus |
Can be configured for 8 data lines and 8 address lines (shared with parallel I/O lines), plus I/O read/write |
| Real Time Clock |
Yes |
| Timers |
Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and 8 set/reset registers |
| Watchdog/Supervisor |
Yes |
| Pulse Width Modulator |
4 channels synchronized PWM with 10-bit counter or 4 channels variable-phase or synchronized PWM with16-bit counter |
| Input Capture |
2-channel input capture can be used to time input signals from various port pins |
| Quadrature decoder |
2-channel quadrature decoder accepts inputs from external incremental encoder modules |
| Power |
3.15 V DC (min.) – 3.45 V DC (max.)
625 mA @ 3.3 V while transmitting/receiving
85 mA @ 3.3 V while not transmitting/receiving |
| Operating temperature |
–30° C to +55° C |
| Connector |
Edge connectors for interface with 52-pin mini PCI Express socket |
| Board size |
30 mm × 51 mm × 10 mm |
| Wi Fi specification |
| Network access |
Infrastructure, Ad-Hoc |
| Antenna |
1 U.FL connector, 50 ohms |
| Compliance |
802.11b/g, 2.4 GHz |
|
| Features |
RCM5700 |
RCM5710 |
| Microprocessor |
Rabbit® 5000 @ 50MHz |
| Ethernet |
10/100Base-T |
10/100Base-T with RJ-45 |
| Flash Memory |
1 MB |
| SRAM |
128K (on-board Rabbit 5000) |
| Back up Battery |
Connection for backup battery (to be used for RTC) |
| General Purpose I/O |
Up to 35 parallel digital I/O |
| Serial Ports |
6 CMOS-compatible user-configurable ports |
| Real Time Clock |
Yes |
| Watchdog/Supervisor |
Yes |
| Timers |
Ten 8-bit timers, One 10-bit timer, One 16-bit timer |
| Pulse Width Modulators |
4 channels synchronized PWM with 10-bit counter or
4 channels variable –phase or synchronized PWM with 16-bit counter |
| Input Capture |
2 channels |
| Quadrature Decoder |
2 channels |
| Power |
3.15 - 3.45 V DC 70 mA @ 3.3 V (typical — without Ethernet)
200 mA @ 3.3 V (typical — with Ethernet) |
Visit: www.rabbit.com for more details
Contact Comet Electronics for prices and delivery time!
|
|
| Othetr Rabbit products |
|
| |
|
|
|
| |
|
District Druzhba 2
47, Obikolna Str., Sofia 1582, Bulgaria
Call center- phone: 00 359 2 915 58 55,
fax: 00 359 2 879 32 00
Office (administration) phone: 00 359 2 915 58 00
GSM Gateway: 0885 666 090
e-mail:office@comet.bg |
Bulgaria, Sofia, Shop
23 Tsar Samuil Str.
phone: 00 359 2 915 58 20, 00 359 2 915 58 23,
phone/fax: 00 359 2 951 52 67
e-mail: sofia@comet.bg |
Bulgaria, Plovdiv, Shop
10 Hristo Dyukmedzhiev Str.
phone: 00 359 32 63 41 86, fax: 00 359 32 62 89 09
GSM Gateway: 0885 222 550
e-mail: plovdiv@comet.bg |
Comet Electronics |
|
| |
| |
|
